5.1.3. Display Elements for Tracks and STEM Files
When the HOTCUES mode or the STEMS mode is enabled, the display contains the following ele-
ments:
Display elements for tracks and STEM Files.
(1) Track title: Displays the title of the loaded track or STEM File.
(2) Key value: Displays the current key value of the track or STEM File.
(3) Loop indicator: Displays the selected Loop size. When a Loop is enabled the Loop indicator is
highlighted in green.
(4) Waveform: Displays the Waveform of the track or the STEM File. It also shows stored Cue
Points as white and blue markers, and stored Loops in green markers. The moving red marker
represents the current playhead position.
(5) Remaining Track time: Displays the time remaining until the track or the STEM File ends.
(6) Current Track Tempo: Displays the current tempo for the track or STEM File.
5.1.4. Display Elements on a Remix Deck
When the Deck is a Remix Deck or the SAMPLES mode is enabled, the display contains the fol-
lowing elements:
Display elements on a Remix Deck.
(1) Remix Set title: Displays the title of the loaded Remix Set.
(2) Quantize value: Displays the Quantize value of the Remix Deck. If Quantize mode is enabled
the field is highlighted in blue.
(3) Loop indicator: Displays the selected Loop size. When a Loop is enabled the Loop indicator is
highlighted in green.
(4) Play Type indicator: Indicates if the corresponding Sample in the Sample Cell is a Loop or a
One-shot Sample.
TRAKTOR KONTROL S4 Overview
20
To Next Page
Loading...
