Native Instruments TRAKTOR KONTROL S4 - Playing with MIXER Effects

7.12. Playing with MIXER Effects
A Mixer FX is a grouped effect that can be applied to the audio signal in the Mixer channel using
the Mixer FX Amount knob. You can choose between the FILTER effect and one of four preselec-
ted MIXER FX with the FX SELECT buttons 1 to 4.
The following effects can be selected using the FX SELECT buttons:
FX SELECT buttons.
• FILTER: Selects the FILTER effect.
• FX SELECT 1: Selects the Reverb effect.
• FX SELECT 2: Selects the Dual Delay effect.
• FX SELECT 2: Selects the Noise effect.
• FX SELECT 4: Selects the Time Gater effect.
Besides the Filter Effect, each Mixer FX consists of the individual Effect and a Filter Effect. De-
pending on the direction you turn the FX Amount knob, you either apply the Mixer FX in combina-
tion with a low-pass Filter, or with a high-pass Filter.
Selecting a MIXER Effect for all Mixer Channels
To select a MIXER FX to be applied to all Mixer channels:
• Press the FX SELECT button with the individual MIXER FX.
The FX SELECT button brightly lights up, indicating the MIXER FX is selected. The MIXER
FX ON buttons in the Mixer channels also light up in the corresponding color.
Selecting a MIXER FX for individual Mixer Channels
You can select an individual MIXER FX for any of the Mixer channels:
1. Press and hold the FX SELECT button with the individual Mixer FX.
The FX SELECT button lights up brightly.
2. While holding the FX SELECT button, press the MIXER FX ON button on the individual Mix-
er channel.
3. Release the FX SELECT button.
The MIXER FX ON button in the Mixer channel now reflects the color of the correspond-
ing FX SELECT button.
Tutorials
60