(5) Beat Counter: Represents the current internal Beat Count position of the Remix Deck. Syn-
chronization and Quantize functions are based on this value.
(6) Remix Deck Tempo: Displays the current tempo of the Remix Deck.
For more information, refer to Playing with Remix Decks.
5.2. Mixer
Sitting in the middle of the TRAKTOR KONTROL S4 controller, the Mixer receives the audio sig-
nals coming from Decks. There is one channel for each Deck. The Mixer’s purpose is to adjust the
relative level of each channel, to control the mixer channels’ frequency content, possibly feeding
them into the FX Units before sending the overall result to the Master output, and in the end, to
generate the mix that is sent to your audience. The Mixer also provides you with a crossfader,
which allows you to make seamless transitions between various channels.
Mixer.
(1) Mixer Channel A ,B, C, D: The Mixer channels receive the individual audio signals from the
Decks. Each Mixer channel contains controls to adjust the audio signal's frequency content and to
adjust the outgoing volume before the audio signal is send to the MASTER output. Any Mixer
channel can be individually assigned to FX Units. For more information, refer to Mixer Channel.
TRAKTOR KONTROL S4 Overview
21
To Next Page
Loading...
