7.7. Adjusting Tempo
You can adjust the track tempo with the automatic Deck synchronization function SYNC and the
TEMPO fader. When youusing the TEMPO fader the resulting effect depends on several factors:
• When the SYNC function is used, changing the Tempo by moving the TEMPO fader only works
on the Deck assigned to Tempo Master. Moving the TEMPO fader on the synced Deck has no
effect.
• When the TEMPO fader is locked on the Deck, moving the TEMPO fader has no effect.
• The TEMPO faders can operated in two different modes, in Absolute mode and in Relative
mode. By default, the TEMPO faders operate in Relative mode.
• Relative: In this mode, each TEMPO fader on your S4 affects the TEMPO fader of the soft-
ware Deck relatively to its current position, even if this position does not match the position
of the TEMPO fader on your S4. This notably resolves possible conflicts between the Tem-
po fader and the Deck synchronization.
• Absolute: In this mode, whenever you move the TEMPO fader on your S4, its position is
transmitted 1:1 to the TEMPO fader of the software Deck, no matter what the current posi-
tion of the Tempo fader in the software is. In Absolute mode, the software Deck’s tempo al-
ways matches the TEMPO fader position on your S4, unless you have somehow changed
the software Deck’s tempo.
You can select the TEMPO fader mode in the Preferences. For more information, refer to Prefer-
ences.
Adjusting Tempo
To change the tempo on a Deck:
• Move the TEMPO fader up or down.
Tutorials
49
To Next Page
Loading...
