7.6. Using CUE Channel
You can use the CUE channel on the Mixer to preview tracks in the headphones. Any Mixer chan-
nel is equipped with a CUE button to route the audio signal into the CUE channel. You can use the
MIX and VOL knobs to determining the level for the CUE channel, as well as the ratio between the
cued signal and the MASTER signal.
Routing Audio Signals into the Cue Channel
To route the audio signal from a Mixer channel into the CUE channel:
• Press the CUE button of that Mixer channel.
The audio signal is audible in the CUE channel.
You can route the audio signals of all Mixer channels into the CUE channel at once.
Adjusting the Ratio between the Cue-Mix Signal
In the CUE channel, you can use the MIX knob to determine the ratio between the cued signal and
the MASTER signal.
1. Turn the MIX knob clockwise to let the MASTER signal dominate.
When you turn the MIX knob entirely clockwise, then you will only hear the MASTER signal
in the headphones.
2. Turn the MIX knob counterclockwise to let the Mixer channel signal dominate.
When you turn the MIX knob entirely counterclockwise, you then only hear the Mixer channel
signal in the headphones.
Adjusting the CUE Channel Level
To adjust the CUE channel level:
• Turn the VOL knob clockwise or counterclockwise to increase or to decrease the CUE chan-
nel level.
Tutorials
48
To Next Page
Loading...
