To adjust the outgoing level of a Mixer channel:
• Move the relevant channel fader up or down.
The outgoing level changes accordingly. When the channel fader is set to its maximum posi-
tion, the outgoing signal level equals the level of the incoming signal.
You can also use the channel faders to transitions between audio signals without using the cross-
fader.
Adjusting the MASTER Output Level
The MASTER output stage receives the signals coming from the Mixer channels. You can deter-
mine the MASTER output level with the MASTER knob.
To adjust the MASTER output level:
• Turn the MASTER knob clockwise or counterclockwise.
The MASTER output level adjusts accordingly.
Adjusting the BOOTH Output Level
The Booth output stage receives the same signals coming from the Mixer channels like the MAS-
TER output stage. You can determine the BOOTH output level with the BOOTH knob:
• Turn the BOOTH knob clockwise or counterclockwise.
The outgoing BOOTH output level adjusts accordingly.
Tutorials
46
To Next Page
Loading...
