Changing the Loop Size
You can instantly change the size of an enabled or disabled Loop:
• Turn the LOOP encoder clockwise or counterYou can change the size of the enabled or disa-
bled Loop:clockwise.
The Loop size for the enabled Loop instantly changes by the value displayed in the Loop
Control bar.
If there is no Loop enabled, turning the LOOP encoder only selects a Loop size.
Storing a Loop as Hotcue
To store a Loop as a Hotcue:
1. Press the LOOP encoder to enable a Loop.
2. Press an unlit Pad.
The Loop is stored as a Hotcue. The Pad lights up green.
Triggering a Stored Loop
To trigger a stored Loop:
• Press a green lit Pad.
The Loop is enabled. The playback position jumps to the stored Loop In point and playback
loops by the selected Loop size.
Moving the Loop within the Track
You can move an enabled or disabled Loop forwards or backwards within the track:
• Turn the MOVE encoder clockwise or counterclockwise.
Tutorials
57
To Next Page
Loading...
