The Volume parameter value in the display changes accordingly.
Muting Sample Slots
You can mute a Sample Slot immediately:
1. Press and hold the Mute button.
2. While holding the Mute button, press the Pad corresponding to the Sample Slot.
The Sample Slot is muted.
3. To unmute the Sample Slot, repeat the aforementioned steps.
Applying Filter Effect to Sample Slot
Any Sample Slot contains a Filter control for applying a high-pass or low-pass filter:
1. Press and hold the Pad below the Pad for the corresponding Sample to access the sound
controls for the Sample Slot.
The display shows the current Volume and Filter parameter values.
2. While holding the Pad, turn the LOOP encoder clockwise or counterclockwise to apply a
high-pass or low-pass Filter effect to the Sample Slot.
Tutorials
67
To Next Page
Loading...
