Instructions for Use XLTEK Protektor32
44
To set up one or more timelines:
1. Click the Timelines tab.
2. To add a new timeline row to the timelines table, click Append.
3. To select the type of timeline, right-click the cell in the Type column and select Interleaved or
Consecutive. Interleaving causes back and forth stimulation that alternates from one side to the
other.
4. In the Restart column, set the restart property for each cell to Never, Continuous or On
Interval….
5. Click Save.
I) Groups Tab
The Groups tab is used to set up collections of traces. Each group may consist of traces that are
associated with a given stimulus (e.g. L(eft) Lower SSEP, R(igth) Lower SSEP). Each group can be
viewed in a separate window during acquisition or review.