VX3 TO VX6 INSTALLATION MANUAL PARTS AND TOOLS
VERSION 1.0 2023-08-16 PAGE 1.12.3
Module Exchange Program
Nautel offers a module exchange program for customers who require expedited servicing and
replacement of faulty modules. The module exchange program provides immediate replacement of
failed modules with refurbished modules. May not be applicable to all customers.
The replacement module is shipped to the customer as soon as the customer reports the
failure. The customer then returns the failed module to Nautel using the same shipping
package.
Tools for Installation
The tools you need during transmitter installation include the following:
Digital voltmeter (recommend 1000 V, CAT-III rating)
Phillips screwdrivers, sizes #1 and #2
Flathead screwdriver (3/16”) for ac connections
small Flathead screwdriver (3/32”) for Interlock connection
torque wrench, capable of 15 in-lbs (1.7 N-m)
Pliers, needle-nose and lineman
Wire cutters/strippers
8 mm nut driver, socket or wrench for station ground
Electrician’s knife
To Next Page
Loading...
