Nautilus Bowflex VeloCore User Manual

Assembly / Owner’s Manual
24
USB Charging
If a USB Device is attached to the USB Port, the Port will attempt to charge the Device. The power supplied from the USB Port may not be enough to
operate the Device and charge it at the same time.
Bluetooth
®
Heart Rate Enabled
Your tness machine is equipped to be able to receive a signal from a Bluetooth
®
Heart Rate (HR) Monitor. Follow the instructions provided with your
Bluetooth
®
HR monitor.
If you have a pacemaker or other implanted electronic device, consult your doctor before using a Bluetooth
®
strap or other
Bluetooth
®
heart rate monitor.
Note: Be sure to remove the protective cover (if provided) from the Heart Rate Sensor before use.
Bluetooth
®
Heart Rate Armband
A Bluetooth
®
Heart Rate Armband is provided with your tness machine. To use the Bluetooth
®
Heart Rate Armband, follow the instructions that were
included with the Armband.
If you have a pacemaker or other implanted electronic device, consult your doctor before using a Bluetooth
®
armband or other
Bluetooth
®
heart rate monitor.
Note: Be sure to remove the protective cover (if provided) from the Heart Rate Sensor before use.
1. Put the Bluetooth
®
Heart Rate Armband onto the upper portion of your forearm.
2. Conrm that Bluetooth
®
wireless connection is active on the machine. If the Bluetooth
®
icon is blue, then it is active.
If the icon is red, then Bluetooth
®
wireless connection must be activated. To activate Bluetooth
®
wireless connection:
a. Tap the Bluetooth
®
icon.
b. Tap “Manage Bluetooth
®
”.
c, Slide the option from “OFF” to “ON”.
d. Tap Back to exit.
3. When ready to exercise, start your workout.
4. Push the On/Off LED button on the Heart Rate Armband. Be sure to only push the On/Off LED button once.
5. During your workout, the Heart Rate Armband may take up to 60 seconds to connect. When connected, the Bluetooth
®
Heart
Rate Device icon will be displayed along with your heart rate.
Note: The Armband can only be connected once to an active workout. If the On/Off LED button is pushed after being con-
nected, the workout must be restarted.
Use the values calculated or measured by the machine’s computer for reference purposes only.

Nautilus Bowflex VeloCore Specifications

General

Brand	Nautilus
Model	Bowflex VeloCore
Category	Exercise Bike
Language	English