5
A. Attach Main Base (9) to Rear Base Frame (1) using
Connecting Plate E (16) and the hardware shown. Do
not tighten hardware.
B. Attach Rear Upright (5) to Rear Base Frame (1) and
Rear Top Frame (2) using Connecting Plate B (13) and
the hardware shown. Do not tighten hardware.
C. Attach Leg Extension Frame (8) to Main Base (9) using
the hardware shown. Tighten hardware securely.
CAUTION: Leg Extension Frame (8) is heavy. Use two
people to assemble this component.
D. Attach Front Upright (7) to Leg Extension Frame (8)
using the hardware shown. Tighten hardware securely.
E. Attach Top Beam (6) to Front Upright (7) and Rear Top
Frame (2) using Backing Plate (10) and the hardware
shown. Tighten all frame hardware securely.
step
2
Step #2 Materials:
#Component Qty
5Rear Upright 1
6Top Beam 1
7Front Upright 1
8 Leg Extension Frame 1
9Main Base 1
10 Backing Plate 1
13 Connecting Plate B 1
16 Connecting Plate E 1
76 Hex Bolt - 3/8" x 4 1/4"L 5
79 Hex Bolt - 3/8" x 3"L 13
95 3/8" Flat Washer 36
97 3/8" Lock Nut 18
NS-700
To Next Page
Loading...
Need help?
General
