Nautilus NS-4000 User Manual

Assembly Instructions
NS-4000
Rev. E

Nautilus NS-4000 Specifications

General

Drive System	Front Drive
Resistance Levels	20
Stride Length	20 inches
User Weight Capacity	300 lbs
Type	Elliptical
Display	LCD
Heart Rate Monitoring	Contact

Summary

Required Tools

Step 1: Main Base and Uprights

Step 1 Instructions

Detailed instructions for assembling the Nautilus NS-4000 gym, step 1.

Step 2: Press Arm Frame

Step 2 Instructions

Detailed instructions for assembling the Nautilus NS-4000 gym, step 2.

Step 3: Leg Press and AB Crunch Support

Step 3 Instructions

Detailed instructions for assembling the Nautilus NS-4000 gym, step 3.

Step 4: AB Crunch Attachments

Step 4 Instructions

Detailed instructions for assembling the Nautilus NS-4000 gym, step 4.

Step 5: Leg Press Linkage Assembly

Step 5 Instructions

Detailed instructions for assembling the Nautilus NS-4000 gym, step 5.

Step 6: Leg Extension Frame

Step 6 Instructions

Detailed instructions for assembling the Nautilus NS-4000 gym, step 6.

Step 7: Weight Stack Assembly

Step 7 Instructions

Detailed instructions for assembling the Nautilus NS-4000 gym, step 7.

Step 8: Pec Fly Cable Installation

Step 8 Instructions

Detailed instructions for installing Pec Fly cables on the Nautilus NS-4000.

Step 9: Leg Press Cable Routing

Step 9 Instructions

Detailed instructions for routing the Leg Press cable on the Nautilus NS-4000.

Step 10: Leg Extension Cable Routing

Step 10 Instructions

Detailed instructions for routing the Leg Extension cable on the Nautilus NS-4000.

Step 11: Pec Fly Cable Routing

Step 11 Instructions

Detailed instructions for routing Pec Fly cables on the Nautilus NS-4000.

Step 12: Secondary Cable Routing

Step 12 Instructions

Detailed instructions for routing the secondary cable on the Nautilus NS-4000.

Step 13: Low Row Cable Routing

Step 13 Instructions

Detailed instructions for routing the low row cable on the Nautilus NS-4000.

Step 14: Pull Down Cable Routing

Step 14 Instructions

Detailed instructions for routing the pull down cable on the Nautilus NS-4000.

Step 15: Primary Cable Installation

Step 15 Instructions

Detailed instructions for installing the primary cable on the Nautilus NS-4000.

Step 16: Station Shroud Attachment

Step 16 Instructions

Detailed instructions for attaching station shrouds on the Nautilus NS-4000.

Step 17: Final Assembly Checks

Attach Accessories

Attaching accessories to the cable ends using cable clips.

Lubrication and Final Check

Lubricating guide rods and performing a final check of cables and hardware.

Cable Tensioning

Adjusting cable tension for optimal performance and safety.