Nautilus T626 Assembly Manual

40
Reset a User Profile
1. From the Power-Up Mode screen, push the User button to select one of the User Profiles.
2. Push the OK button to select the User Profile.
3. The Console display shows the GOAL TRACK prompt. Push the Decrease () button to change the prompt.
Note: To exit the User Profile options, push the PAUSE/STOP button and the console will go back to the Power-Up Mode
screen.
4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Profile
option.
5. The Console will now confirm the request to reset the User profile (the default selection is ‘RESET - NO’). Push the
Increase() or Decrease() buttons to adjust the selection.
6. Push OK to make your selection.
7. The Console will go to the Power-Up Mode screen.
Changing Incline Levels
Push the Incline Level Increase() or Decrease() buttons to change the incline angle of
the Deck at any time with the Safety Key installed. To rapidly change the incline level push
the desired Pre-Set Incline Button, and then the Incline Enter Button. The Deck will adjust
to the selected incline level.
Note: After a Pre-Set Incline Button is pushed, the Incline Enter Button must be
pushed within 12 seconds.
Be sure the area below the machine is clear before lowering the Deck. Fully lower the
Deck after each workout.
Exercise on this machine requires coordination and balance. Be sure to anticipate
that changes in belt speed and incline angle of deck can occur during workouts, and
be attentive in order to avoid loss of balance and possible injury.
Be sure that the workout space you are utilizing has adequate height clearance, taking into
consideration the height of the user and the maximum height of the fully inclined Deck.
Changing Speed Levels
Push the Speed Level Increase() or Decrease() buttons to change the Belt Speed at any time in a workout program. To
rapidly change the Speed level push the desired Pre-Set Speed Button, and then the Speed Enter Button. The Walking Belt
will adjust to the desired speed.
Note: After a Pre-Set Speed Button is pushed, the Speed Enter Button must be pushed within 12 seconds.
Profile Programs
These programs feature different incline angles of the deck and belt speeds based on the maximum and minimum speed
supplied by the user. The user can also manually adjust the incline and speed values at any time during a workout. The Profile
Programs are organized into Categories (Quick Goal, Heart Health, Weight Control, Interval, Train, and Custom). Each Profile
Program has 16 segments allowing for a variety of workouts.
During a Profile Program, the Console will make an audio beep if the next segment of the workout has a change in
Incline or Speed. Be prepared for changes in Incline and Speed with each segment change.
INCLINE SPEED
COMPARE
INCLINE 0-15%
SPEED
km/hmph
12
10
8
6
5
4
2
19.3
16.0
12.8
9.6
8.0
6.4
3.2
15
13
10
8
5
2
0
Fitness Score
Pre-Set Incline
Buttons
Incline
Enter
Button

Nautilus T626 Specifications

General

Quantity per pack	1 pc(s)
Foldable	Yes
Incline range	0 - 15 %
Maximum speed	19.3 km/h
Minimum speed	0 km/h
Product color	Black, Grey
Number of programs	26
Maximum user weight	136 kg
Backlight color	Blue

Weight and Dimensions

Width	- mm
Weight	- g
Running area (W x L)	20 x 60 mm
Running belt thickness	2 mm
Running deck thickness	25 mm