Nautilus T628 User Manual

45
CONSOLE SETUP MODE
The Console Setup Mode lets you control the sound settings ( on/off ), adjust the date and time, or see maintenance
statistics (Total Run Hours and Software Version– for service technician use only).
1. Hold down the PAUSE/STOP button and Right button together for 3 seconds while in the Power-Up Mode to go into
the Console Setup Mode.
Note: Push PAUSE/STOP to e[it the Console Setup Mode and return to the Power-Up Mode screen.
2. The Console display shows the Date prompt with the current setting. To change, push the Increase/Decrease buttons
to adjust the currently active value (Àashing). Push the Left/Right buttons to change which segment is the currently
active value (month / day / year).
3. Push OK to set.
4. The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust
the currently active value (Àashing). Push the Left/Right buttons to change which segment is the currently active value
(AM or PM / hour / minute ).
5. Push OK to set.
6. The Console display shows the UNITS prompt with the current setting. Push the Increase/Decrease buttons to
change between “MILES” and “KM”.
7. Push OK to set.
. The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons
to change between “ON” and “OFF”.
,IWKH6RXQGKDVEHHQPXWHGWKH&RQVROHZLOOGLVSOD\WKH³$8',22))´SURPSWEHIRUHD:RUNRXWVWDUWVDV
a reminder.
9. Push OK to set.
10. The Console display shows the TOTAL RUN HOURS for the machine.
11. For the ne[t prompt, push the OK button.
12. The Console display shows the BLE FW UPDATE prompt.
Note: If you have an update for the Bluetooth
®
Low Energy (also called Bluetooth
®
Smart) system, insert the USB
Flash Drive with the update ¿le into the Console. Push the Increase/Decrease buttons to select the “CONFIRM-YES”
option, and push OK.
The Console will display “SAVING”, and then “REMOVE USB” when it is safe to remove the USB Flash Drive.
13. For the ne[t prompt, push the OK button.
14. The Console display shows the Software Version code.
15. For the ne[t prompt, push the OK button.
16. The Console display shows the LOG prompt.
17. For the ne[t prompt, push the OK button.
1. The Console will display the Power-Up Mode screen.

Nautilus T628 Specifications

General

Running Surface	20" x 60"
Decline	No
Bluetooth Connectivity	Yes
Incline Range	0% to 15%
Speed Range	0 to 12 mph
Programs	26
Weight Capacity	350 lbs
Dimensions	72.2" L x 35.2" W x 57.6" H
Heart Rate Monitoring	Contact and telemetry enabled
Folding	Yes
Display	DualTrack™ LCD Display with Blue Backlighting