Page 12 Naxa Electronics
⚠L
Only one device can be paired with the
sound bar at a time. Disable Bluetooth on
other devices to prevent interference. The
sound bar will try to reconnect automati-
cally with the last paired device when it is
placed in Bluetooth mode. If the Bluetooth
connection is lost due to external factors,
or it will not reconnect automatically, you
may need to pair again with the
. Clear the from the
Bluetooth Devices list on your source
device before pairing again.
NFC One-Touch Setup
If you have a device that is equipped with NFC and
Bluetooth, you can pair the device to the sound bar
with a single tap. It’s just that easy!
1. Place the sound bar in Bluetooth mode (press the
POWER/SOURCE button [8] until the Source LED
turns blue).
2. Locate the NFC sensor marked on the sound bar.
Touch the back of your device to the NFC sensor.
The sound bar will sound a chime when it detects
your device.
3. Your device may ask you for permission to pair with
the sound bar. Select “yes”.
4. The sound bar will emit another chime when pair-
ing is complete.
⚠L
Before attempting to use NFC to set up
your Bluetooth connection, make sure that
Bluetooth and NFC are enabled on your
device. For devices running Android™ OS,
you can nd the NFC option in the “Set-
tings > Wireless & Networks > More...”
menu screen.
Only one device can be paired with the
sound bar at a time. Disable Bluetooth on
other devices to prevent interference.
During Playback
• Press the button [11] to stop playback. Press
again to resume playback.
NAXA NHS
-2011
NAXA NHS-2011
To Next Page
Loading...
