www.naxa.com Page 13
• Press the button [13] to skip to the next track;
press [12] to skip to the previous track
• Press the
key on the remote control to turn off
the sound. Press it again to resume the sound.
• Press the VOL–/VOL+ buttons [9/10] to adjust the
volume level.
Using AUX IN 1 Mode
AUX IN 1 sources may include:
• Personal audio players
• Personal computers or laptops
AUX IN 1 connection
1. Use a stereo 3.5mm jack cable (supplied) to con-
nect the headphone (or LINE/Audio) output of the
source device (e.g., an iPod) to the AUX IN 1 audio
input jack found on the side of the unit.
2. Turn on the unit. Press the POWER/SOURCE [8] un-
til the Source LED indicator turns violet. Start play-
back on the source device.
To Next Page
Loading...
