NCE NCE1DBT - Bluetooth Mode; Pairing and Connection; Phone Call Operations; Bluetooth Audio Streaming

12
Bluetooth Mode
Note:
Foryoursafety,avoidtalkingonthephoneas
muchaspossiblewhiledriving.
Bluetoothis awireless transmission wayfor
shortdistance.Thebuilt-inBluetoothcancon-
nectwiththemobilephoneshavingBluetooth
function.
After connecting,youcancontrolyourmobile
phonethroughtheunit.
Pairing
Usethisfunctiontoestablishaconnectionbe-
tweentheunitandyourmobilephone.
1.PressandholdSRCbuttonuntil“PAIRING”
appearsontheLCD.
2.Turnon Bluetooth function of your mobile
phone,keepphone within 3 meters to the
unit and start to search for Bluetooth de-
vices.
3.After the name of the Bluetooth module
“SUN-BMA19”appearsonthepairinglistof
your mobilephone,select it.Atthis time,a
pairingcode is required.Enter the pairing
code(“1234”by default) andtheBluetooth
pairing will process automatically. Some
mobile phones may instruct you to select
connect or disconnect, please select con-
necting.
Exit Pairing
After pa i r  s u c cessfully, if y o u  w a n t  to
disconnect, pressand hold SRCbuttonuntil
“PAIROUT“appearsontheLCD.
Make a Call
After pair successfully, press SRC button
repeatedlytoselectBTMUSICmode,press

buttontoselectfrom[DIALNUM].
To dial a number
1. Select [DIAL NUM], then press the VOL
knob.
2. PresstheMENUbuttonrepeatedlytoselect
therstnumber,presstheknobtoconrm.
3. Selectothernumbersasstep2.Ifthenum-
beriswrong,pressthe
buttontodelete.
4. Press
todialout.
To use a number in call log or directory
1. Selecttheoptionsotherthan[DIALNUM].
2. Presstheknobtoshowthelogordirectory.
Rotatetheknobtoselectanumber.Ifthere
arenorecord,displayshows[NOMATCH].
3. Press
todialout.
Receive
1. After
 pair
successfully,
if there is a call
incoming, the unit switch to BT mode
automatically.
2. Press 


to receive.
3. Press



tohangup.
Voice Transfer
During talking, press 
button
to transfer audio
from the unit to your mobile phone.
Note:
Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.
BT Audio
(if the mobile phone has the A2DP & AVRCP
functions)
After pair successfully, press MODE button
repeatedly to switch to BTAUDIO mode. In
Bluetooth mainmenu of your mobile phone,
open the audio player and set the transmission
mode to Bluetooth. The audio will be trans-
ferred from the mobile phone to the unit. Some
mobile phones may hint that to connect with
the unit. After found the Bluetooth device name
“SUN-BMA19” on mobile phone, you should
select to connect it, and then input the pairing
code (“1234” by default). When music play-
back, touch


to play/pause, and press
/
key on the TFT or remote control to previ-
ous/next track (if the options are available).