NComputing L130 User Manual

NComputing L-Series User Manual rev.05.07.12
Page 19 of 95
Offline Registration
In the case of Offline Registration, follow the instructions below. If you have completed the online
registration section, skip to “Using the access device.”
• If you don’t have standard Internet connectivity, you can use standard email to register your
vSpace Server software and L-series access devices.
• To use offline registration, select the “Register” option, and click “Next.”
• At the "Customer Data" screen, if the data fields are not already populated, enter the registered
user's relevant information. Each field in this window must be filled in. Once you’ve entered all
the data, click the "Next" button.
• The registration wizard will then show you a list of all unregistered L-series access devices that
are currently connected to this vSpace Server host and can now be registered.
• On the next screen you then select the “Create off line registration file” option and click “Next.”
• You’ll need to select the location where you wish to store the registration data file that you’ll
later email to NComputing. Note that you cannot type directly into the “Create activation file”
field, but you must click on the “Select” button to navigate to the directory where you wish to
store the offline registration data file.

NComputing L130 Specifications

General

Brand	NComputing
Model	L130
Category	Wireless Access Point
Language	English