NComputing L-Series User Manual rev.05.07.12
Page 60 of 95
When you click on the "Apply" button, changes to the USB-Device assignments are saved. To
discard changes, simply navigate to another tree item or close the console without clicking on
the "Apply" button. For the assignment to take effect a reboot of the host system may be
required.
Software Settings (LAN)
The "Software Settings (LAN)" tree allows you to see and change settings for the host PC and
all other PCs on the network that are running the vSpace software. Once you select a server in
the tree, the same settings are present as are in the "Software Settings (local)" tree item.
Hardware Settings (LAN/local)
The "Hardware Settings (LAN/local)" tree allows you to see and change settings for all access
devices on the network.
To Next Page
Loading...
