NComputing L130 User Manual

NComputing L-Series User Manual rev.05.07.12
Page 59 of 95
In the "USB-Device Assignment(s)" tree item, you can control connections between USB ports
on the host and vSpace sessions. To use this function, navigate the tree to select a USB port.
When you right-click on an entry under “USB-Device Assignment(s)”, you can de-select the
“Hide the ports that are not connected” item to see all ports. After selecting a port, the following
information is displayed:
• The port number.
• If a device is connected, the device's simple name.
• The device's longer name, usually including the manufacturer and model.
• A check box for "Allow all users access to every USB port." When this is selected, all
USB ports are connected, as if in one hub. When the box is not checked, a list of
available USB ports is displayed where you can select which one(s) is/are to be
connected to the selected device. This list shows each access device's MAC address
and its serial number along with a checkbox.

NComputing L130 Specifications

General

Brand	NComputing
Model	L130
Category	Wireless Access Point
Language	English