NCR 7600 - Peripheral Usage; Grounding Instructions; References; Revision Record

iv
Peripheral Usage
Thisterminalshouldonlybeusedwithperipheraldevicesthatarecertifiedbythe
appropriatesafetyagencyforthecountryofinstallation(UL,CSA,TUV,VDE)orthose
whicharerecommendedbyNCRCorporation.
Warning: DONOTconnectordisconnectthetransactionprinterwhiletheterminal
isconnectedtoACpower.This
canresultinsystemorprinterdamage.
Warning: DONOTconnectordisconnectanyserialperipheralswhiletheterminal
isconnectedtoACpower.Thiscanresultinsystemorprinterdamage.
Grounding Instructions
Intheeventofamalfunction orbreakdown,groundingprovidesapathofleast
resistanceforelectriccurrenttoreducetheriskofelectricshock.Thisproductis
equippedwithanelectriccordhavinganequipment‐groundingconductoranda
groundingplug.Theplugmustbepluggedintoamatchingoutlet
thatisproperly
installedandgroundedinaccordancewithalllocalcodesandordinances.Donot
modifytheplugprovided–ifitwillnotfittheoutlet,havetheproperoutletinstalled
bya qualifiedelectrician.Improperconnectionoftheequipment‐groundingconductor
canresultinariskof
electricshock.
Theconductorwithinsulationhavinganoutersurfacethatisgreenwithorwithout
yellowstripesistheequipment‐groundingconductor.
Ifrepairorreplacementoftheelectriccordorplugisnecessary,donotconnectthe
equipment‐groundingconductortoaliveterminal.Checkwithaqualifiedelectrician

orservicepersonnelifthegroundinginstructionsarenotcompletelyunderstood,orif
youareindoubtastowhethertheproductisproperlygrounded.
Useonly3‐wireextensioncordsthathave3‐pronggroundingplugsand3‐pole
receptaclesthataccepttheproduct’splug.Repairorreplacedamaged
orworncords
immediately.
References
• NCRRealPOS40SitePreparationGuide(B005‐0000‐1975)
• NCRRealPOS40HardwareServiceManual(B005‐0000‐1976)
• NCRRealPOS40PartsIdentificationManual(B005‐0000‐1977)
Revision Record
Issue Date Remarks
AOct2010 FirstIssue
BAug012 Release1.1
CJuly2012 UpdatedSolidStateOptimizationchapter