NCR 7600 - RS-232 Installation

Hardware Installation 9
RS-232 Installation
1. ConnecttheRS‐232PrinterInterfaceCabletotheRS‐232connectorontheprinter
andtoanon‐poweredRS‐232connectorontheterminal.
Note: ThefactorydefaultsettingfortheRS‐232portsispowered.Seethe
Appendix:PoweredSerialPortSettings.
2. ConnectthePoweredUSBPrinterInterfaceCable
tothePowerConnectoronthe
printerandtothe24VPoweredUSBConnectorontheterminal.
28576
A
B
Power
USB
24V USB
497-0441177 - 1 m
(1432-C088-0010)
497-0473052 - 4 m
(1432-C404-0040)