NCR 7600 - Page 82

4 BIOS Setup
ACPI/APM Configuration
ACPIAwareO/S [Yes]
Suspendmode [S3(STR)]
USBDeviceWakeupFromS4 [Enabled]
PowerButtonMode [On/Off]
RestoreonACPowerLoss [LastState]
AdvancedResumeEventControls
LANWakeUpFromS5 [Enabled]
ResumeOnRing [Disabled]
ResumeOnRTCAlarm [Disabled]
USB Configuration
LegacyUSBSupport [Enabled]
Port64/60Emulation [Disabled]
USB2.0ControllerMode [HiSpeed]
BIOSEHCIHand‐Off [Enabled]
LegacyUSB1.1HCSupport [Enabled]