NCR 7600 - Page 86

2 Operating System Recovery
8. Attheprompt,inserttheCDcontainingtheoperatingsystemimage(disk1ifOS
occupiesmorethanonedisk).Press[Enter].
9. Press[A]atthefollowingprompttoaccepttheargumentsandtobegintherestore
process.Press[Enter].
Confirm Pending Operation
Mode is: restore
2) Drive is: USB/SATA Storage A Size: 80GB
3) Directory path is: /Images/
4) Filename is: nnnnnaaa
5) Reboot after operation complete: yes
6) Resize last data partition if possible: no
7) Resize last data partition to: Full Disk
A) Accept these arguments
V) View OS Documentation
Q) Quit and reboot
10. AtthefollowingpromptreplacetheCDwiththenextCD.Press[Enter]to
continue.
+------+ Automatic mount +------+
| |
| Please, press “ok” to mount |
| [/dev/cdrom] on [mnt/cdrom] |
| |
| |
| +----+ |
| | Ok | |
| +----+ |
| |
+-------------------------------+
11. RepeatthepreviousstepforeachCDasrequired.
12. RemovethelastCDbeforethesystemreboots.
13. CompletetheOSinstallationasrequiredperOS.