Getting Started
How To Open And Close A Security Enclosure Fitted With A Controlled Access Electronic Lock
2-14 NCR
SHUVRQD
V
îî
ATM Operator Manual
Opening
2
To open a security enclosure with a Mas-Hamilton
controlled access electronic lock in Bank Mode (1 User)
proceed as follows:
1
Spin the knob on the lock counterclockwise.
Note:
Rotating the knob counter-clockwise generates
enough power within the lock to allow it to operate for
90 seconds after the rotation stops. The LCD powers
down after 40 seconds. Upon power up, the LCD will
provide instructions for the user to follow while opening
the enclosure.
Cencon Lock
Locking Handle
Keypad
LCD
Touch Key
Reader
Knob
(Opening/Closing)
Book.bk Page 14 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...