NCR personaS84 ATM - Page 41

Getting Started
How To Open And Close A Security Enclosure Fitted With A Controlled
NCR
SHUVRQD
V
 ATM Operator Manual 2-15
2
Keep spinning the knob until "EC" appears on the
LCD and bleeps are heard.
3
Enter personal combination number (or the factory
default number (50-25-50) using the keypad.
4
"IPI" (Input Personal Identifier) will appear on the
LCD.
5
Touch the personal identification key to the key
reader.
Note: The lock processor will generate a combination
number and compare the user entered combination
number with the generated combination number.
6
If the combination number and the generated
combination number match the LCD will display
"Opr" and bleeps will be heard.
7
If the knob is now turned clockwise the lock will
open and the locking bolt will be retracted. The
security enclosure door then can now be opened.
8
If the combination numbers do not match, a
lightening bolt symbol (to indicate a security
violation) will appear on the LCD. If this occurs,
follow the in-house security procedures for this
condition.
Book.bk Page 15 Thursday, March 11, 1999 2:24 PM