Getting Started
How To Open and Close The Electronic Dial Combination Lock
NCR
SHUVRQD
V
îî
ATM Operator Manual 2-19
2
If the lock is set to operate on a dual combination,
enter the second six digits of the combination (set to
456789 when shipped from factory). If the sequence
is entered correctly, the lock will beep and the led
flash. Turn the keypad clockwise to unlock the lock.
3
Turn the safe handle counter-clockwise to open the
door.
Locking
2
To lock the security enclosure proceed as follows:
1
Close the security enclosure door and turn the
handle clockwise.
2
Turn the keypad counter-clockwise until the keypad
is vertical. The door should now be locked.
Book.bk Page 19 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...