Getting Started
How To Open and Close The Electronic Dial Combination Lock
2-20 NCR
SHUVRQD
V
ATM Operator Manual
Emergency Opening
Procedure
2
If the keypad is completely “dead”, that is it does not
flash or beep, it is an indication that the lock battery
requires replacing.
To open the lock when it is in this condition you must
hold a new 9 volt alkaline battery against the terminals
of the lock. The larger battery terminal must be against
the larger of the lock terminals. The battery must be held
in place while carrying out the normal procedures for
opening the lock.
Note:
Only alkaline batteries must be used in the lock.
Book.bk Page 20 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...