Getting Started
How To Use The VGA Enhanced Rear Operator Panel
2-34 NCR
SHUVRQD
V
îî
ATM Operator Manual
Note: To run a program, or a program from any of the
subsequent menus which will be displayed, press the
number key or the Function Display Key (FDK) on the
VEROP which corresponds to the option you wish to
select.
It is possible to transfer the operator functions from the
operator panel to the front of the terminal using the
TRANSFER INTERFACE option as described in the NCR
publication, Supervisor Functions Manual,
(D1-4718).
Book.bk Page 34 Thursday, March 11, 1999 2:24 PM
To Next Page
Loading...