NCR RealPOS 25 - Page 97

Entering Setup 4-87
Single Processor Mode [Disabled]
Intel (R) HT Technology [Enabled]
Enable XD [Enabled]
Machine Check [Enabled]
Fast Strings [Enabled]
Processor Power Management [Disabled]
Thermal Configuration
. TM1 [Enabled]
. TM2 [Enabled]
. DTS [Enabled]
. Thermal Offset [Disabled]
. Active Trip Point Hi Fan [71 C]
. Active Trip Point Lo Fan [55 C]
. Passive Trip Point [95 C]
. Passive TC1 Value [ 1]
. Passive TC2 Value [ 5]
. Passive TSP Value [10]
. Critical Trip Point [POR]
P-States (GV3) [Enabled]
Boot Performance Mode [Max Performance]
ACPI 3.0 T-States [Enabled]
C-States [Disabled]
Serial ATA (SATA)
SATA Device [Enabled]
SATA Controller Mode [AHCI]
Device 0 (Port 0) [Not Installed]
Device 1 (Port 1) [INTEL SSDSA2CT - 40]
► SATA Port 0 Configuration
. Port Location [Internal]
. Hot Plug [Enabled]