3-8 Configuring the System
Main Menu Items
Menu Item Settings (default is bold)
Legacy Diskette A Disabled
360 KB 5 1/4”
1.2 MB 5 1/4”
720 KB 3 1/2”
1.44/1.25 MB 3 1/2”
2.88 MB 3 1/2”
Selects the diskette drive type.
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
6007 MB
None
CD-ROM
None
Note: The following setting information
applies to the primary and secondary master
and slave devices.
Each device menu item displays the hard
drive or CD-ROM identifier if a device is
installed.
If you install a hard drive that does not feature
auto IDE type detection or your IDE hard
drive was formatted on another system with
parameters different from those reported by
the drive, enter a parameter for each of the
fields in the device submenu.
Bring up a device submenu by pressing
Enter
. The submenus include Type, CHS
Format, and LBA Format. Each submenu and
its fields are described next.
To Next Page
Loading...
Need help?
General
