NEC 2000 Series User Manual

Configuring the System 3-19
Security Menu Items
Menu Item Settings (default is bold)
Security Mode Press
Enter
to access the Security Mode.
Use this mode to select
Password
(default),
SmartCard, or FingerPrint. Press
Enter
to
open the selected field.
Use the SmartCard field to assign access to
the SmartCard Reader by the supervisor
and/or user. Press
Enter
to bring up the
SmartCard Reader dialog box for setting up
SmartCard security.
The Assign Supervisor SmartCard field
controls Supervisor access to the BIOS
Setup utility and the system. A PIN number
controls access.
The Assign User SmartCard field controls
user access to the system at boot. A PIN
number controls access.
Password on Boot
Disabled
, Enabled
When Enabled, requires password entry
before boot. System remains in secure
mode until password is entered.
Fixed Disk Boot Sector
Normal
, Write Protect
Write Protect protects the boot sector on the
hard disk from viruses.
Diskette Access
Supervisor
, User
Controls access to the diskette drive.

NEC 2000 Series Specifications

General

Brand	NEC
Model	2000 Series
Category	Desktop
Language	English