Features
14 DS1000/2000 Feature Handbook Supplement
Note that Call Forwarding has priority over Do Not Disturb. If both are enabled simultaneously
at an extension, Call Forwarding is in force.
Do Not Disturb BLF for Hotline and Call Coverage Keys
The following chart shows the Do Not Disturb Busy Lamp Field flash rates for Hotline and Call
Coverage keys.
If you have a 22-Button or 34-Button Display Telephone
To enable or disable DND:
1. Do not lift the handset or press the SPK key.
2. Press your DND key. You see:
The first line of the display shows the currently selected DND type.
3. Select the soft key for the DND type you want to select.
OR
Dial a digit (0-3) for the DND type you want to select.
1 (or
EXT) = Incoming trunk calls blocked
2 (or ICM) = Incoming Intercom calls blocked
3 ( or ALL) = All calls blocked
0 (or OFF) = Cancels DND.
(2) Incoming Intercom Calls Blocked • Incoming Intercom calls
• Transferred calls
• Paging announcements
• Ringing from Intercom calls to the Ring Group
master number (if the extension is in the group)
• Extension hunting calls that normally ring the
extension
(3) All Incoming Calls Blocked • All calls blocked by Option 1 and Option 2.
(0) Cancel Do Not Disturb • Option 0 cancels Do Not Disturb
Hotline and Call Coverage Key Busy Lamp Indications
When the key is: The covered extension is:
Off Idle or not installed
On Busy
Flashing slowly
1
Ringing
Wink off In DND for trunk calls (option 1)
Flashing fast In DND for Intercom calls
(option 2) or All Calls (option 3)
1
Available on Call Coverage key only.
Do Not Disturb Options
This DND option: Blocks these calls:
To Next Page
Loading...
