EasyManuals Logo

NEC DS1000 Manual

NEC DS1000
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Features
30 DS1000/2000 Feature Handbook Supplement
phone in the building, implement Walking Class of Service, and dial without restriction. After the
phone goes idle, Walking Class of Service remains in effect for 10 seconds. This permits you to
make multiple calls before the phone returns to its normal restrictions.
To enable Walking Class of Service at a co-worker’s extension:
1. Press ICM.
2. Dial ##0.
At a 22- or 34-Button Display Telephone, you see:
At a Super Display Telephone, you see:
If your extension does not have a PIN code already entered, skip to step 4.
When entering a PIN number or extension number:
- CLEAR erases your entire entry.
- LND backspaces over (erases) the last digit entered.
3. Enter your own extension number + HOLD.
At a 22- or 34-Button Display Telephone, you see:
At a Super Display Telephone, you see:
4. Enter your PIN number + HOLD.
If your extension does not have Walking Class of Service capability, you will hear
error tone.
5. Place any call or use any feature allowed by your Toll Restriction and Class of Service settings.
You can place additional calls. Walking Class of Service will automatically deactivate
after 10 seconds.

Other manuals for NEC DS1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC DS1000 and is the answer not in the manual?

NEC DS1000 Specifications

General IconGeneral
BrandNEC
ModelDS1000
CategoryTelephone
LanguageEnglish

Related product manuals