4. (Outgoing call only) Dial your outside number.
To enter a Forced Account Code:
1. Access a line for an outside call (any method you prefer).
You hear three beeps indicating that you must
enter an Account Code.
2. Enter your Account Code (up to 10 digits, using 0-9).
If your system uses Verified Account Codes, you
must enter a code that is stored in your system.
3. Dial , press / , or press your
Account Code Programmable Function Key.
Your Communications Manager can tell which
options are available to you.
4. Dial your outside number.
Using Account Codes with Store and Forward
To place an outside call when both Store and Forward and
Forced Account Codes are enabled:
If Forced Account Codes are enabled only for long
distance calls and you are placing a local call, do not
enter an Account Code. Just dial the call normally.
1. Press + Dial (or optionally 90-98).
OR
Press Switched Loop key + Dial line group number (0-8).
OR
Press Fixed Loop key.
2. Dial number + Wait for 3 beeps + Enter Account Code.
3. Wait 6 seconds, dial , or press / .
ACCT CODEACCT
ACCT CODEACCT
Account Codes
2
80000MFH07_02.qxd 6/2/04 9:38 AM Page 2
To Next Page
Loading...
Need help?
General
