NEC DS2000 - Calling Your Mailbox

Calling Your Mailbox
To call your mailbox:
Your
MW key and Ring/Message lamp flash fast
when you have new messages in your mailbox.
1. Press or .
OR
Press .
OR
Press , then dial the Voice Mail master number
(e.g., 700) followed by your mailbox number.
Your mailbox number is normally the same as
your extension number. You may optionally dial a
co-worker’s mailbox — or use this procedure to call
your mailbox from a co-worker’s phone.
2. Lift handset for privacy.
3. If requested by Voice Mail, enter your security code.
Your
Ring/Message lamp will go out after you
call your mailbox.
Your
MW key will be on while you are connected
to your mailbox.
To hang up after calling your mailbox:
1. Press .
Your MW key will go out.
V-MAIL 00VM00
182
Voice Mail
80000MFH07_02.qxd 6/2/04 9:39 AM Page 182