NEC DS2000 Feature Handbook

To cancel the Caller ID display and return your phone to
its normal display:
You can only do this while you’re on a call, not
while your phone is ringing.
1. Press .
To turn the Caller ID display back on (after you press
CLEAR to cancel it):
1. Press .
The display the Caller ID information for a co-worker’s (i.e.,
a third party) call:
1. Press + .
2. Press the key for the call you want to check.
You can press a line key, loop key, Hotline key or
Call Coverage key.
— Press a line key
while the call is ringing or con-
nected to the third party.
— Press a loop key while the call is ringing the third
party.
— Press a Hotline key
while the call is connected to
the third party.
— Press a Call Coverage key
while the call is ring-
ing the third party.
3. Hang up when you are done.
37
Caller ID
80000MFH07_02.qxd 6/2/04 9:38 AM Page 37

NEC DS2000 Specifications

General

Brand	NEC
Model	DS2000
Category	Telephone
Language	English