NEC DSX-40 - Page 104

Last Number Redial
96 ◆ Features DSX Feature Handbook
a.
Press SPEAKER.
b.
Lift the handset.
4.
The system tries to use the same line as that used for your initial call.
• If that line is busy, the system automatically selects a line from the same group as your initial call.
• If you hear busy tone and your extension has Line Queuing, you can dial 2 to queue for a line to become free.
If you hang up, the system converts the queue to a Line Callback.
- With Line Queuing, the number automatically redials when a line is available.
To redial your last call at a Super Display Telephone:
1.
Press REDIAL.
At a Super Display telephone you see (for example):
LAST 5 DIALED
1-212-555-1212
1-203-926-5400
411
913-555-8764
555-4113
• To return to idle, press REDIAL again.
2.
Press the soft key for the number you want to recall.
• The store number dials out.
3.
The system tries to use the same line as that used for your initial call.
• If that line is busy, the system automatically selects a line from the same group as your initial call.
• If you hear busy tone and your extension has Line Queuing, you can dial 2 to queue for a line to become free.
If you hang up, the system converts the queue to a Line Callback.
- With Line Queuing, the number automatically redials when a line is available.
To erase (clear) all the numbers from your Enhanced Last Number Redial buffer:
1.
Press REDIAL + CLEAR.
2.
Do one of the following:
a.
[YES]
[YES]
Select to clear the buffer.
b.
[NO]
[NO]
Select to exit without clearing the buffer.
Using Enhanced Last Number Redial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]