Flexible Numbering Plan
76 ◆ Features DSX Feature Handbook
Flexible Numbering Plan
Description
The system’s Flexible Numbering Plan allows you to change the digits users dial to reach the attendant,
other co-worker’s, outside lines, UCD Groups, and Ring Groups. The following chart shows the areas of the
system number plan you can change.
Operation
None
Change the digits users dial for co-workers and other features.
For this feature:
You can change the digits a user
dials to:
These digits are
normally:
Attendant Position (page 14) Reach the system operator(s) 0 or 01-04
Central Office Calls, Placing
(page 33)
Access a Line Group 90-98
Direct Line Access (page 42) Directly access a line 101-164
Extension Hunting (page 65) Reach a UCD Group master number 700-707
Group Ring (page 80) Reach a a Ring Group master number 600-607
Intercom (page 92) Call a co-worker over the Intercom 300-427
To Next Page
Loading...
