Time and Date
160 ◆ Features DSX Feature Handbook
Time and Date
Description
The system Time and Date appears on display telephones and Station Message Detail Recording reports.
The system administrator can change the time and date from the system programming mode. In addition,
extension users can change the time and date from the User Programmable Features. Although the data is
entered in 24-hour format, it always displays in 12-hour format (e.g., 1300 = 1:00PM). The system can auto-
matically adjust the time for Daylight Savings Time.
Operation
User Programmable Feature
The Time and Date shows on telephone displays and prints on system reports.
Changing the System Time and Date
Feature Mnemonic Operation Access Level
Time and Date
#TD (#83)
#TD
+ Enter time in 24-hour clock using hours (2 digits),
minutes (2 digits) and seconds (2 digits) + HOLD + Enter
date using month (2 digits), day (2 digits) and year (4 dig-
its) + HOLD + SPEAKER to exit.
4 and 5
To Next Page
Loading...
Need help?
General
