NEC DSX-40 - Page 173

User Programmable Features
DSX Feature Handbook Features ◆ 165
Features
Hotline
#HL
#45 #HL + Press flashing Hotline key + Enter exten-
sion for new Hotline partner + HOLD + Pro-
gram another Hotline key or SPEAKER to exit.
3-5
Off Hook Signaling
#OHS
#647 #OHS + Select mode (C = Outside line, I =
intercom
, D = Hotline) + Select option (see
below) +
SPEAKER to exit.
Outside line options: C = Camp On tone, O =
Off
Hook Ringing, 0 = None
Intercom options: C = Camp On, V = Voice
Over, 0=None
Hotline Options: C = Camp On, V = Voice
Over, 0=None,
3-5
Paging (Incoming)
#VP
#87 #VP + Y to enable or N to disable + SPEAKER
to exit.
3-5
Prime Line Assignment
#PLA
#752 #PLA + Press one of your flashing programma-
ble keys, INTERCOM, or CLEAR for none +
SPEAKER to exit.
3-5
Feature Key Assignments
#KP
#57 #KP + Press key you want to program + HOLD +
INTERCOM + Press Volume Up or Volume
Down
to select key option + HOLD + (Enter any
additional data if required
1
+ HOLD ) + Press
Volume Up or Volume Down to select another
key to program, or SPEAKER twice to exit.
3-5
1
To set up a System Night key, press CLEAR
instead of entering additional data.
Feature Key Ringing
#RAC
#722 Call Coverage Keys: #RAC + Call Coverage
Key repeatedly to select ringing mode +
SPEAKER to exit.
Call Coverage Keys flash as follows: Lamp only
= On red, Immediate ring = On green, Delay
ring = Fast flash green.
2-5
#RAL
#725 Outside Line Keys: #RAL + Line Key repeatedly
to select ringing mode +
SPEAKER to exit.
Line keys flash as follows: Lamp only = On red,
Immediate ring = On green, Delay ring = Fast
flash green, Night ring = Slow flash green.
#RAP
#727 Group Call Pickup Keys: #RAP + Group Call
Pickup Key repeatedly to select ringing mode +
SPEAKER to exit.
Group Call Pickup Keys flash as follows: Lamp
only = On red, Immediate ring = On green,
Delay ring = Fast flash green.
Programmable Idle Menu
Soft Keys (Super Display)
#SM #76 Press the soft key you want to program (or press
Volume Up or Volume Down to scroll through
the keys) + HOLD + INTERCOM + Volume Up
or Volume Down to select key option + HOLD
+ SPEAKER to exit.
1-5
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y, then
SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature Mnemonic Numeric Operation Access Level