NEC DSX-40 - Page 35

Call Timer
DSX Feature Handbook Features ◆ 27
Features
Stopping the Call Timer
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To stop the Call Timer:
1.
Do one of the following:
a.
Hang up.
• The timer automatically stops after 6 seconds.
b.
Press the Manual or Automatic Call Timer key.
• To restart the timer, press CLEAR.
Resetting the Call Timer
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To reset the Call Timer to 00:00:00 while it is running (i.e., timing your call):
1.
Press CLEAR.
Reviewing a Call’s Duration
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To review the duration of your last timed call:
1.
While idle, press the Manual or Automatic Call Timer key.
• Press CLEAR or wait 6 seconds to return to the idle Time/Date display.