NEC Dterm IP - Advanced Speed Calling; Speed Calling (-Station;Group); Speed Calling - System Operation

– 40 –
To Originate a Call Using Speed Calling (-Station/Group)
Press the Redial button.
Press the desired speed calling number.
To Originate a Call Using Speed Calling – System
To program Speed Calling – System key (on One-Touch Speed Calling key)
Press Feature key.
Press desired One-Touch Speed Calling key. The LCD displays previously stored digits.
Dial the “Speed Calling – System” access code and the abbreviated call code.
Press Feature again.
To operate from the Speed Calling – System key
Press the “Speed Calling – System” key.
If the D
term
does not have the “Speed Calling – System” key, dial the “Speed Calling – System” access code,
then the abbreviated call code.
To operate from the Directory key
Press the Directory key.
Dial the abbreviated call code (maximum of 4 digits).
XXXXXX
LNR[ ]/SPD[_ _] –X
*
4:26 PM TUE 13 APR 2004
SPEED SET
4:26 PM TUE 13 APR 2004
XXXX
4:26 PM TUE 13 APR 2004
XXXX