– 53 –
To Answer a Camped-on Call
While engaged in a call, receive the camp-on indication (one short tone burst). Answer LED flashes.
Press Answer. Call in progress is placed on hold.
Connection to camped-on call is established.
Press Answer to return to original call.
Camped-on call is placed on hold.
By repeating these steps, it is possible to alternate between calls.
Display indicates connected station or trunk at any given time.
Call Waiting – Originating
To program call waiting key (on One-Touch Speed Calling key)
Press Feature.
Press desired One-Touch Speed Calling key.
Press Recall. ! appears on LCD. (See Note.)
Dial “Call Waiting” feature access code.
Press Feature.
Note: To program a hook switch for transfer or feature activation, press Recall as first digit. ! displays on LCD.
To activate call waiting – originating
Dial desired station number, receive busy tone.
Press CALL WAITING.
Receive special ringback tone.
Call waiting tone is sent to busy station.
type
Trunk
number
Trunk
4:26 PM TUE 13 APR 2004
CAMP ON DDD 3
Called station
number
4:26 PM TUE 13 APR 2004
C WAIT 2000
To Next Page
Loading...
