NEC Dterm IP - Intercom Features; Automatic Intercom Initiation and Answering; Bridge into Automatic Intercom Call

– 47 –
Automatic Intercom
To initiate
Lift handset or press Speaker key.
Press the AICM key.
Hear ringback tone.
To answer
AICM key flashes red indicating an incoming intercom call.
Press AICM, lift handset or press Speaker. LED lights solid green.
If called station is engaged in a non-intercom call, the station may press AICM after placing original caller on hold
(with HOLD key).
To bridge into an automatic intercom call
Note: Bridging is an optional feature.
Press the AICM key, lift handset or press Speaker.
A three-party conference is established.
Called party
4:26 PM TUE 13 APR 2004
ICM 2
Calling party
4:26 PM TUE 13 APR 2004
ICM 1
Overriding party
4:26 PM TUE 13 APR 2004
OVERRIDE 1
4:26 PM TUE 13 APR 2004
CONF