NEC Dterm IP - Cancel Call Forwarding - All Calls

– 60 –
To cancel
Press Speaker. Receive dial tone. If cancelling for another station, press
MULTILINE APPEARANCE.
Press FWD or dial “Call Forwarding – All Calls” cancel code.
Receive service set tone. LED goes out at your station
(or the D
term
of the multiline station).
Press Speaker. Call Forwarding – All Calls is cancelled.
Using the Soft Key
Press FDA Soft Key.
Receive service set tone and “FORWARD CANCEL” is displayed.
Call Forwarding – Busy Line
To set
Press Speaker. Receive dial tone.
If setting for another station, press MULTILINE APPEARANCE.
Press FWD-BY or dial “Call Forwarding – Busy Line” access code. Receive special dial tone.
Dial destination station or external telephone number. Receive service set tone.
FWD-BY LED lights (at your station or at the D
term
of the multiline station you are setting).
Press Speaker. Call Forwarding – Busy Line is set.
4:26 PM TUE 13 APR 2004
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
FORWARD CANCEL
MIC >>>
4:26 PM TUE 13 APR 2004
FORWARD SET