NEC Dterm IP - Call Forwarding - Busy Line; Set Call Forwarding - Busy Line

– 61 –
Using the Soft Key
Press FDB Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
“FORWARD SET” is displayed; Call Forwarding – Busy Line is set.
To verify (with D
term
4D/8D/16D/16LD/32D)
Press FWD-BY.
Display indicates the station number calls are forwarded to.
Note 1: If recipient station is a D
term
4D/8D/16D/16LD/32D, LCD displays:
Note 2: With Soft Key operation, FDB flashes on the display.
To cancel
Press Speaker. Receive dial tone. If cancelling for another station, press
MULTILINE APPEARANCE.
Press FWD-BY or dial “Call Forwarding – Busy Line” cancel code.
Receive service set tone. LED goes out at your station
(or the D
term
of the multiline station).
Press Speaker. Call Forwarding – Busy Line is cancelled.
Using the Soft Key
Press FDB Soft Key.
Receive service set tone and “FORWARD CANCEL” is displayed.
4:26 PM TUE 13 APR 2004
FORWARD SET
MIC >>>
Forwarding station
4:26 PM TUE 13 APR 2004
FORWARD 2000
4:26 PM TUE 13 APR 2004
FORWARD CANCEL
4:26 PM TUE 13 APR 2004
FORWARD CANCEL
MIC >>>