NEC Dterm - Page 43

NEC America, Inc. Issue 1
D
term
Cordless Lite Owner’s Manual 4 - 5
3. When the call is finished, place the handset back in
the charging unit.
AutoStandby
automatically hangs
up the phone.
-OR-
If the handset is away from the charging unit, press
talk
to hang up the telephone.
To answer a call if the handset is not in the charging unit:
1. When a call is received, the handset rings and the red
LED on one of the function keys flashes.
2. Press the function key with the flashing LED to answer
the call.
-OR-
Press
talk
to answer the incoming call.
Note 1:
The Ringing Line Preference feature must be
enabled in order to answer calls with the
talk
key. Contact the authorized NEC Dealer to
for programming this feature.
Note 2:
If two or more calls come in at the same time,
pressing the
talk
key answers the prime line.
3. When the call is finished, place the handset back on
the charging unit.
AutoStandby
automatically hangs
up the telephone.
-OR-
If the handset is away from the base unit, press
talk
to
hang up the telephone.