NEC ELECTRA ELITE IPK II - Page 16

8
Note 1: Initially (at default), there are 1000 System Speed Dial
buffers.
Note 2: Unless you preselect, Trunk Group Routing selects the trunk
for the call. The system may optionally select a specific Trunk
Group for the call.
Note 3: If you have a DSS Console, you may be able to press a DSS
Console key to chain to a stored number.
To dial a Group Speed Dialing number:
1. Press the Speaker key.
2. Dial #4 (default Service Code).
- OR -
Press the Redial key.
- OR -
Press the Group Speed Dialing key (Service Code 751: 28).
Note: To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Group Speed Dial buffer number (none at default).
The stored number dials out.
Note 1: Initially, there are no Group Speed Dial buffers assigned.
Note 2: Unless you preselect, Trunk Group Routing selects the trunk
for the call. The system may optionally select a specific Trunk
Group for the call.
Note 3: If you have a DSS Console, you may be able to press a DSS
Console key to chain to a stored number.